Weihai Hongyuan Mining Machinery Equipment Co., Ltd
How to deal with the clogging of the cyclone

How to deal with the clogging of the cyclone

In some cases, the nozzle of the collector feed will be clogged when working under no load. In order to largely reduce the occurrence of such a situation, the technicians suggest that under normal working conditions, the spare cyclone valve can be used alternately, and only the unused cyclone is cut off.

15

2021

/

09

The application of cyclone in mineral processing industry

The application of cyclone in mineral processing industry

Cyclone is mainly used in mineral processing industry for classification, sorting, concentration and desliming. In the classification equipment, cyclone and mill to form a grinding classification system, in the desliming equipment used in the re-election plant desliming, this time to introduce the application of cyclone in the mineral processing industry.

15

2021

/

09

How to adjust the cyclone state

How to adjust the cyclone state

Cyclone working condition is normal, what is the judgment standard and debugging method, the overflow concentration and fineness to meet the next process conditions, but also need to first meet the conditions, the following describes how to adjust the cyclone state.

15

2021

/

09

How to clean impurities before hydrocyclone slurry injection

How to clean impurities before hydrocyclone slurry injection

The diameter ratio is also an important design parameter of the hydrocyclone group, usually the smaller the diameter ratio, the smaller the classification size. In addition, the shape and size of the inlet is also one of the factors affecting the work of the cyclone group.

15

2021

/

09

What are the different feeding methods of hydrocyclones?

What are the different feeding methods of hydrocyclones?

Hydrocyclone has been a rate of classification, desliming equipment, due to its simple structure, easy to manufacture, large processing capacity, obvious effect and is widely valued and used outside. Although the hydrocyclone has many advantages, but the disadvantages also exist, when the use of new wear-resistant materials (such as cemented carbide, silicon carbide, etc.) to make the sink mouth and the wear-resistant parts of the ore mouth, it can solve the problem of greater power consumption, high-pressure ore wear serious.

15

2021

/

09

How to choose hydrocyclone?

How to choose hydrocyclone?

The selection of the hydrocyclone is based on: 1 the volume of slurry to be treated Q (m3 / h); 2 the graded particle size (or larger size of the overflow) d (mm).

15

2021

/

09

Several main types of cyclones

Several main types of cyclones

According to the construction section, it is divided into one section of classifier cyclone and two section of classifier cyclone. According to the function, it is divided into classifier cyclone, dewatering cyclone, desliming cyclone, deslagging cyclone, thickening cyclone and special cyclone for tailing dry discharge.

15

2021

/

09

Cyclone common failures and handling methods do you understand

Cyclone common failures and handling methods do you understand

In addition to the classification operation in the grinding cycle, hydrocyclones can also be used for desliming, dewatering and removing flotation chemicals. Cyclone has many advantages, simple structure, no moving parts, large processing capacity per unit volume, low cost of equipment, easy maintenance, the number of pulp in the machine and less time, etc.. So what are the common failures and treatment methods of cyclone, this time specify the following.

15

2021

/

09

< 12 >

Online Message

SUBMIT

Products

Cyclone

High Frequency Dewatering Screen

Wear Resistant Material

Wear Resistant Valves

Contact Us

Address：No. 190-1, Wenhua West Road, Torch High Technology Industrial Development Zone, Weihai City, Shandong Province

Tel：+86-13562187705

Email：171365641@qq.com

Copyright © Weihai Hongyuan Mining Machinery Equipment Co., Ltd

Powered by 300.cn | label | yunzixun | Business license